order module#
The order sheet: what a human needs to place the order correctly.
Documentation, not a machine-readable artifact, and deliberately not a design rule check. It reports the parameters JLCPCB’s form asks you to select; the runtime already answers whether the design meets them.
- FINISH = 'HASL (with lead)'#
PRELIMINARY. JITX cannot describe a surface treatment in a stackup, so there is nothing to read off the substrate and no side channel worth inventing for designs to adopt; see plans/stackup-revision-plan.md section 4.3. This is JLCPCB’s order-form default so that confirming the form unchanged agrees with this sheet, and it must be checked against the live form.
- ROGERS_FINISH = 'ENIG'#
PRELIMINARY, for the same reason as FINISH. On a Rogers board JLCPCB’s order form allows only ENIG or OSP and selects ENIG when Rogers is chosen (the form’s own script, read 2026-11-08); their capabilities page lists high-frequency boards among those that do not support HASL. Their high-frequency PCB page lists ENIG as the only finish, so the two JLCPCB sources disagree on OSP; the sheet defaults to ENIG, which both allow.