reference_escapes module#

Where channel B’s two strobe escapes sit: the escape control points of a reference layout of channel B’s two byte lanes on this board, with the memory at (6.4509, -17.3772) mm turned 180 degrees.

Each pair’s PairInsertion and PairPoint at each part, on L3_SIG1, as a position in mm and a heading in degrees from +x, in the frame of the circuit that holds the part, so they move when that circuit moves. The FPGA’s circuit sits at the board origin, unrotated, so its frame is the board’s; the FPGA sits at (0, 12) in it. The memory’s circuit sits at (6.4509, -17.3772) unrotated, with the memory at its origin turned 180 degrees.

The FPGA’s entries are keyed by byte slot of jitxexamples.jumpstart_kits.vp1002_lpddr4.pinout.LPDDR4_X32, the memory’s by channel B byte lane (ch[1].d[k]). In the reference layout byte lane 0 (DQS[2]) leaves the FPGA from slot 3’s strobe balls and byte lane 1 (DQS[3]) from slot 2’s.

The table holds positions and headings only. Each control point’s invert flag comes from the kit’s polarity rule: inverted at the FPGA, not at the memory.

class ControlPoint(x, y, heading)[source]#

Bases: NamedTuple

A control point’s position, mm, and heading, degrees from +x, in its part’s circuit frame.

Parameters:
x: float#

Alias for field number 0

y: float#

Alias for field number 1

heading: float#

Alias for field number 2

class PairEscape(insertion, point)[source]#

Bases: NamedTuple

One pair’s escape at one part: its insertion beside the pair’s two vias and its pair point just outside the ball field.

Parameters:
insertion: ControlPoint#

Alias for field number 0

point: ControlPoint#

Alias for field number 1

FPGA_ESCAPES = mappingproxy({2: PairEscape(insertion=ControlPoint(x=2.6282, y=-0.42, heading=180.0), point=ControlPoint(x=1.3821, y=-5.3816, heading=270.0)), 3: PairEscape(insertion=ControlPoint(x=6.9014, y=2.3414, heading=225.0), point=ControlPoint(x=7.9313, y=-5.3802, heading=270.0))})#

The FPGA’s escapes of channel B’s strobes, by byte slot.

MEMORY_ESCAPES = mappingproxy({0: PairEscape(insertion=ControlPoint(x=2.9593, y=4.5487, heading=0.0), point=ControlPoint(x=3.149, y=7.5103, heading=90.0)), 1: PairEscape(insertion=ControlPoint(x=-2.7365, y=4.5583, heading=0.0), point=ControlPoint(x=-2.4139, y=7.7831, heading=90.0))})#

The memory’s escapes of channel B’s strobes, by byte lane of ch[1].