jitxexamples.jumpstart_kits.js5_diplexer package#

JS5 reference solution: a diplexer for 2.4 to 2.5 GHz and 5.1 to 5.9 GHz on JLCPCB’s 2-layer 0.76 mm RO4350B board: the board one run of the JS5 runbook produced, with the jacks’ in-pad vias left open where the run had them filled and capped, a change no solve has scored.

  • network: the network, its eight 0402 parts from the jitxexamples catalogue and its three Würth edge-launch SMA jacks.

  • main: the board, placed, routed and poured in code.

  • launch: each jack’s launch, shared geometry for the three.

  • lines: the 50 ohm line’s structure, fence, stitching and rules.

  • bodies: the chip bodies the body keepouts are drawn from.

  • substrate: the JLCPCB substrate with the jacks’ open in-pad via.

The run’s HFSS setup, which needs the JITX Ansys library, is not part of this package. fab/ holds the fab notes and the JLCPCB packet exported from main.Diplexer.

Submodules#