wurth_elektronik_60312202114514 module#

60312202114514 / WR-SMA end launch jack#

This module provides a component definition for the Würth Elektronik 60312202114514, a WR-SMA 50 ohm end launch jack with a flat centre tab, for a 1.6 mm board.

The land pattern comes from the recommended land pattern of the Würth datasheet drawing, revision 001.001. All dimensions are in mm:

  • centre pad 0.61 +/-0.05 wide and at least 1.97 long, from the board end;

  • ground pads 9.9 +/-0.05 outer and 7.1 +/-0.05 inner overall width, 5.0 +/-0.05 long, on the top and on the bottom of the board.

The land pattern has no ground vias. The drawing gives the part as 50 ohm from DC to 18 GHz, with VSWR 1.2 and insertion loss 0.14 dB at most up to 12.4 GHz, and notes that “The VSWR in application varies decisively according to PCB layout”.

The land pattern’s frame is the frame of the vendor’s HFSS model (HFSS_MODEL_URL): x = 0 is the body face, which sits on the board edge, +x runs into the board along the centre pad, and the pads are centred on y = 0. Place the part with its origin on the board edge and its +x axis pointing into the board.

The courtyard, on the top and on the bottom, covers what sits on the board: the pads, and the shell’s ground tabs, which the vendor model puts at x 0 to 4.76 within the body’s 9.52 mm width. It starts at the board edge, since the body behind the face hangs off the board.

CENTER_PAD_WIDTH = 0.61#

centre pad 0.61 +/-0.05 wide.

Type:

Datasheet recommended land pattern

CENTER_PAD_LENGTH = 1.97#

centre pad 1.97 minimum from the PCB end.

Type:

Datasheet recommended land pattern

GROUND_OUTER = 9.9#

ground pads 9.9 +/-0.05 outer overall width.

Type:

Datasheet recommended land pattern

GROUND_INNER = 7.1#

ground pads 7.1 +/-0.05 inner overall width.

Type:

Datasheet recommended land pattern

GROUND_LENGTH = 5.0#

ground pads 5.0 +/-0.05 long, top and bottom.

Type:

Datasheet recommended land pattern

BODY_WIDTH = 9.52#

body 9.52 by 7.92; the vendor model spans y -4.76 to 4.76, so 9.52 is the width across the board edge.

Type:

Datasheet

TAB_REACH = 4.76#

the shell’s ground tabs reach x = 4.76 into the board.

Type:

Vendor model (HFSS_MODEL_URL)

COURTYARD_EXCESS = 0.25#

Courtyard margin beyond the pads and tabs, in mm, as the Molex and Weidmuller connectors in this package use.

HFSS_MODEL_URL = 'https://www.we-online.com/components/products/download/ANSYS_60312202114514%20%28rev25a%29.a3dcomp'#

The vendor’s HFSS 3D component (.a3dcomp) for this part, rev25a, kept for later use: nothing in this repository downloads or reads it yet. The file was recorded by 2026-11-05 as 390,182 bytes, with the SHA-256 in HFSS_MODEL_SHA256; check a download against both. Its native frame is the land pattern’s frame: x = 0 at the body face on the board edge, +x into the board, and z = 0 on the top copper.

HFSS_MODEL_SHA256 = '54cdf702be7343e09a787fa0de413e77984569b4b6bcdddee27d8adccfc90959'#

SHA-256 of the rev25a file at HFSS_MODEL_URL, to check a download against.

class WurthLaunchLandpattern[source]#

Bases: Landpattern

The centre pad, and a ground pad on each side of it on the top and on the bottom of the board, each with a soldermask opening and paste, and a courtyard on each side.

class Wurth60312202114514[source]#

Bases: Component

Würth Elektronik WR-SMA 60312202114514, 50 ohm end launch jack, flat tab, for a 1.6 mm board.

manufacturer: str | None = 'Würth Elektronik'#

Manufacturer for this component.

mpn: str | None = '60312202114514'#

Manufacturer part number for this component.

datasheet = 'https://www.we-online.com/components/products/datasheet/60312202114514.pdf'#
reference_designator_prefix: str | None = 'J'#

Reference designator prefix for this component. This will be used to generate a unique reference designator for each component of the same type.

Note

This field is a required data point for matching components between builds. If this value changes (including changing from unset to set), it will be treated as a new component, even if nothing else changes.

sig = Port()#

The centre pin.

gnd = Port()#

all four ground pads.

Type:

The shell

Device#

alias of Wurth60312202114514