jitxexamples.jumpstart_kits.vp1002_lpddr4 package#

The JS1 VP1002 with one LPDDR4 x32 interface offered on banks 702 and 701.

A supplied part for JumpStart Kit 4: the FPGA offers every byte swap and bit swap AMD’s LPDDR4/4X pin rules allow on one layout, and JITX picks the assignment when the board is routed. A design requires bundles.VersalLPDDR4 from circuit.VP1002LPDDR4 and nets it to the memory.

  • pinout: the layout and its sources, as data.

  • bundles: the controller-side bundle and the per-slot DQ ports.

  • circuit: the VP1002 circuit with the offer.

  • package_delays: a package delay file for the offer’s pins, in the shape of Vivado’s I/O ports export, holding synthetic estimates, not AMD data.

  • power: the memory’s rails, the vendors’ straps and ties, and the ZQ, IO_VR and transceiver RREF calibration resistors.

  • decoupling: decoupling for every supply rail of the memory and the FPGA, after published reference boards, each capacitor netted and tied to a ball of its rail, for placement in the layout.

Submodules#